1 / 3
Eureka Mignon MCI dosing cup platform — zdjęcie 1
1 / 3

Eureka Mignon MCI dosing cup platform

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A stand for my dosing cup, so I can grind without holding the cup in my hands

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
18
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

Just a simple platform that fits my coffee dosing cup. 

My old Eureka Mignon MCI coffee grinder had an annoying problem. I had to push the portafilter against the front of grinder to activate the motor. I.e, I had to stand there holding the portafilter until the grinding was complete. (There is a timer function, but this is not working the way I want.)

Since I already modified the grinder for single dosing, I prefer to just start the grind with the main switch on the side and do nothing until all the coffee is finished grinding.

I had to do a simple hardware hack to fix this. Disconnect the power and open the bottom of the grinder and remove the cable in port J2. Attach a jumper and bridge the J2 connector. It will close the circuit and activate the motor as soon as you turn on the grinder with the main switch on the side.  

Tagi