Eureka Mignon MCI dosing cup platform
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A stand for my dosing cup, so I can grind without holding the cup in my hands
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Just a simple platform that fits my coffee dosing cup.
My old Eureka Mignon MCI coffee grinder had an annoying problem. I had to push the portafilter against the front of grinder to activate the motor. I.e, I had to stand there holding the portafilter until the grinding was complete. (There is a timer function, but this is not working the way I want.)
Since I already modified the grinder for single dosing, I prefer to just start the grind with the main switch on the side and do nothing until all the coffee is finished grinding.
I had to do a simple hardware hack to fix this. Disconnect the power and open the bottom of the grinder and remove the cable in port J2. Attach a jumper and bridge the J2 connector. It will close the circuit and activate the motor as soon as you turn on the grinder with the main switch on the side.