Elegoo Mars Z-Axis Adjustment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My first publication. My first print with the Elegoo Mars showed me that I had a deviation of 1.6mm at the calibration…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 431
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
My first publication.
My first print with the Elegoo Mars showed me that I had a deviation of 1.6mm at the calibration cube in the Z-axis.
After I noticed that the Elegoo Mars has only a fixed holder for the light barrier for the Z-axis I decided to create my own adjustable construction.
After the production and the assembly of the unit shown here I could adjust the Z-axis exactly.
Note:
For the exact adjustment I took out the resin container and put 2 sheets on the LCD. Then I adjusted the holder so that it runs out without any force on the Z-axis.
Then I let the Z-axis move upwards by 0.1mm and set Z=0 via the menu item Set.
The following calibration cube had a measure of 20.01mm, this was repeated several times with the same result.
I hope that this construction can also help others to set the perfect Z-axis.
Suggestions from you are welcome.
Translated with www.DeepL.com/Translator
Print Settings
Printer:
Anet A8 MGN
Rafts:
No
Supports:
Yes
Resolution:
0.12
Infill:
10%
Filament:
Tianse PLA
Black
Category: 3D Printer Parts