Elegoo Mars Z-Axis Adjustment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My first publication. My first print with the Elegoo Mars showed me that I had a deviation of 1.6mm at the calibration…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 0
- Views
- 431
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
My first publication.
My first print with the Elegoo Mars showed me that I had a deviation of 1.6mm at the calibration cube in the Z-axis.
After I noticed that the Elegoo Mars has only a fixed holder for the light barrier for the Z-axis I decided to create my own adjustable construction.
After the production and the assembly of the unit shown here I could adjust the Z-axis exactly.
Note:
For the exact adjustment I took out the resin container and put 2 sheets on the LCD. Then I adjusted the holder so that it runs out without any force on the Z-axis.
Then I let the Z-axis move upwards by 0.1mm and set Z=0 via the menu item Set.
The following calibration cube had a measure of 20.01mm, this was repeated several times with the same result.
I hope that this construction can also help others to set the perfect Z-axis.
Suggestions from you are welcome.
Translated with www.DeepL.com/Translator
Print Settings
Printer:
Anet A8 MGN
Rafts:
No
Supports:
Yes
Resolution:
0.12
Infill:
10%
Filament:
Tianse PLA
Black
Category: 3D Printer Parts