1 / 8
5" Orbital Sander Wall Mount Brackets — zdjęcie 1
1 / 8

5" Orbital Sander Wall Mount Brackets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wall Mounted Brackets

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
7
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This wall mount was originally designed to store a 5" orbital sander, but its modular design makes it useful for many other workshop storage applications.

I have tested with SKIL SR211601 and BOSCH ROS20VSC.

Unlike many holders that support the sander by the sanding pad alone, this design uses a 3/8" wooden dowel between two printed brackets. The sander hangs from the dowel while the body rests naturally against the wall, avoiding the need to store the tool with its full weight resting on the sanding pad.

 Because the two brackets are independent, they can be mounted at virtually any spacing. Simply cut a 3/8" wooden dowel to the desired length and install the brackets to fit your tool.

Features

  • Designed for 5" orbital sanders

  • Two independent mounting brackets

  • Mounting holes sized for #8 wood screws

  • Bracket spacing is fully adjustable

  • Uses an inexpensive 3/8" wooden dowel

  • Modular design accommodates different tool widths

  • Helps avoid resting the sander's full weight on the sanding pad

  • Strong triangular support for excellent rigidity

  • Quick one-handed storage and removal

  • Simple, easy-to-print design

Other Uses

The adjustable spacing makes these brackets useful for much more than an orbital sander. They can also be used to create custom wall storage for:

  • Extension cords

  • Clamps

  • Small power tools

  • Shop accessories

  • Jigs and fixtures

  • Anything that can be supported by a 3/8" dowel

Your imagination is the limit.

Printing

  • Material: PETG

  • Layer Height: 0.20 mm

  • Walls: 4

  • Infill: 15% Gyroid

  • Supports: None (or as required by your print profile)

Note: I've been using this mount successfully with PETG (4 walls, 15% gyroid infill). Your results may vary depending on your printer, material, and print settings. Always inspect printed parts, use appropriate mounting hardware, and ensure the mount is secure before hanging tools. The mounting holes are designed for #8 wood screws. Use screws and anchors appropriate for your wall type.

 

Hopefully this will help organize the workshop, thank you!!

Tagi