5" Orbital Sander Wall Mount Brackets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall Mounted Brackets
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 7
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This wall mount was originally designed to store a 5" orbital sander, but its modular design makes it useful for many other workshop storage applications.
I have tested with SKIL SR211601 and BOSCH ROS20VSC.
Unlike many holders that support the sander by the sanding pad alone, this design uses a 3/8" wooden dowel between two printed brackets. The sander hangs from the dowel while the body rests naturally against the wall, avoiding the need to store the tool with its full weight resting on the sanding pad.
Because the two brackets are independent, they can be mounted at virtually any spacing. Simply cut a 3/8" wooden dowel to the desired length and install the brackets to fit your tool.
Features
Designed for 5" orbital sanders
Two independent mounting brackets
Mounting holes sized for #8 wood screws
Bracket spacing is fully adjustable
Uses an inexpensive 3/8" wooden dowel
Modular design accommodates different tool widths
Helps avoid resting the sander's full weight on the sanding pad
Strong triangular support for excellent rigidity
Quick one-handed storage and removal
Simple, easy-to-print design
Other Uses
The adjustable spacing makes these brackets useful for much more than an orbital sander. They can also be used to create custom wall storage for:
Extension cords
Clamps
Small power tools
Shop accessories
Jigs and fixtures
Anything that can be supported by a 3/8" dowel
Your imagination is the limit.
Printing
Material: PETG
Layer Height: 0.20 mm
Walls: 4
Infill: 15% Gyroid
Supports: None (or as required by your print profile)
Note: I've been using this mount successfully with PETG (4 walls, 15% gyroid infill). Your results may vary depending on your printer, material, and print settings. Always inspect printed parts, use appropriate mounting hardware, and ensure the mount is secure before hanging tools. The mounting holes are designed for #8 wood screws. Use screws and anchors appropriate for your wall type.
Hopefully this will help organize the workshop, thank you!!