1 / 9
Customizable Christmas Name Bauble - Hollow, Playground Script — zdjęcie 1
1 / 9

Customizable Christmas Name Bauble - Hollow, Playground Script

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Type any short name, run one Playground script, get a hollow 80 mm bauble. Not printed yet; blocky name font.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
19
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

CUSTOMIZABLE CHRISTMAS NAME BAUBLE. Type any short name, run one script in the free TrueGeometry Playground, and get a hollow 80 mm bauble with your name raised on the front, a snowflake on the back and a loop for a ribbon.

READ THIS FIRST

- Not physically printed or test-fitted. It is a design study checked only inside the Playground (every part is a closed mesh).

- The name uses the Playground fallback pixel font, so the letters are blocky and a few read oddly.

- The STL has 128 zero-area triangles (harmless for most slicers, but check yours).

- AI-assisted design.

- The STL is the native Playground export of the final scene (no external conversion).

WHAT YOU GET

- Main STL: the full model on one print plate - FrontHalf (name and loop), BackHalf (snowflake), dome-up on their flat rims.

- Glue the two halves at the rim. Cavity wall is 7 mm at the rim, 80 mm diameter.

- christmas_name_bauble_recipe.txt: the full 39-command Playground recipe.

- How-to-run guide PDF with a Customize step, screenshots and three presets (DIYA, NOEL, MIA).

HOW TO CUSTOMIZE

1. Open https://www.truegeometry.com/CoreWebGLTG/KBEAgentHTTP.html (close the Agent Manager pop-up).

2. Click Studio Mode, paste the recipe, press Run, then "Yes, looks good".

3. To change the name, edit these two lines and run on a fresh scene:

   /sketch_text DIYA 11

   /move @NameText -60.5 36.3 4.8

   Presets: NOEL = /move @NameText -61.4 35.9 5.0 ; MIA = /move @NameText -57.0 36.3 4.8

   Keep the name under about 34 mm wide (about 5 letters at size 11). The x value is -46 minus half the name width.

4. Type /export_stl all to save your own STL.

THE FULL RECIPE (39 commands, also attached and in the article https://blog.truegeometry.com/0_0_0_0/blogs/post-8b123896.html)

/sketch_on XY

/sketch_draw line 0 0 0 60

/tag_last AxisLine

/sketch_off

/sketch_on XY

/sketch_draw equation t<1?40*sin(t*1.5708):(t<2?40-7*(t-1):33*(3-t)) t<1?40*cos(t*1.5708):(t<2?0:28*(t-2)) 0 3 120

/tag_last ShellProf

/sketch_off

/revolve @ShellProf @AxisLine 360

/tag_last FrontHalf

/move @FrontHalf -46 0 0

/revolve @ShellProf @AxisLine 360

/tag_last BackHalf

/move @BackHalf 46 0 0

/sketch_on XY

/sketch_text DIYA 11

/tag_last NameSketch

/sketch_off

/extrude @NameSketch 5.7

/tag_last NameText

/rotate @NameText -90 0 0

/move @NameText -60.5 36.3 4.8

/parametric box 30 6 2.4

/tag_last ArmOne

/move @ArmOne 46 38.5 0

/parametric box 30 6 2.4

/tag_last ArmTwo

/rotate @ArmTwo 0 60 0

/move @ArmTwo 46 38.5 0

/parametric box 30 6 2.4

/tag_last ArmThree

/rotate @ArmThree 0 120 0

/move @ArmThree 46 38.5 0

/parametric torus 6 2

/tag_last Loop

/rotate @Loop -90 0 0

/move @Loop -46 2 -44

/view iso

/view fit

LICENSE: CC BY 4.0. Credit TrueGeometry. Made with TrueGeometry Playground.

Blog

Playground

Tagi