Customizable Christmas Name Bauble - Hollow, Playground Script
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Type any short name, run one Playground script, get a hollow 80 mm bauble. Not printed yet; blocky name font.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution
CUSTOMIZABLE CHRISTMAS NAME BAUBLE. Type any short name, run one script in the free TrueGeometry Playground, and get a hollow 80 mm bauble with your name raised on the front, a snowflake on the back and a loop for a ribbon.
READ THIS FIRST
- Not physically printed or test-fitted. It is a design study checked only inside the Playground (every part is a closed mesh).
- The name uses the Playground fallback pixel font, so the letters are blocky and a few read oddly.
- The STL has 128 zero-area triangles (harmless for most slicers, but check yours).
- AI-assisted design.
- The STL is the native Playground export of the final scene (no external conversion).
WHAT YOU GET
- Main STL: the full model on one print plate - FrontHalf (name and loop), BackHalf (snowflake), dome-up on their flat rims.
- Glue the two halves at the rim. Cavity wall is 7 mm at the rim, 80 mm diameter.
- christmas_name_bauble_recipe.txt: the full 39-command Playground recipe.
- How-to-run guide PDF with a Customize step, screenshots and three presets (DIYA, NOEL, MIA).
HOW TO CUSTOMIZE
1. Open https://www.truegeometry.com/CoreWebGLTG/KBEAgentHTTP.html (close the Agent Manager pop-up).
2. Click Studio Mode, paste the recipe, press Run, then "Yes, looks good".
3. To change the name, edit these two lines and run on a fresh scene:
/sketch_text DIYA 11
/move @NameText -60.5 36.3 4.8
Presets: NOEL = /move @NameText -61.4 35.9 5.0 ; MIA = /move @NameText -57.0 36.3 4.8
Keep the name under about 34 mm wide (about 5 letters at size 11). The x value is -46 minus half the name width.
4. Type /export_stl all to save your own STL.
THE FULL RECIPE (39 commands, also attached and in the article https://blog.truegeometry.com/0_0_0_0/blogs/post-8b123896.html)
/sketch_on XY
/sketch_draw line 0 0 0 60
/tag_last AxisLine
/sketch_off
/sketch_on XY
/sketch_draw equation t<1?40*sin(t*1.5708):(t<2?40-7*(t-1):33*(3-t)) t<1?40*cos(t*1.5708):(t<2?0:28*(t-2)) 0 3 120
/tag_last ShellProf
/sketch_off
/revolve @ShellProf @AxisLine 360
/tag_last FrontHalf
/move @FrontHalf -46 0 0
/revolve @ShellProf @AxisLine 360
/tag_last BackHalf
/move @BackHalf 46 0 0
/sketch_on XY
/sketch_text DIYA 11
/tag_last NameSketch
/sketch_off
/extrude @NameSketch 5.7
/tag_last NameText
/rotate @NameText -90 0 0
/move @NameText -60.5 36.3 4.8
/parametric box 30 6 2.4
/tag_last ArmOne
/move @ArmOne 46 38.5 0
/parametric box 30 6 2.4
/tag_last ArmTwo
/rotate @ArmTwo 0 60 0
/move @ArmTwo 46 38.5 0
/parametric box 30 6 2.4
/tag_last ArmThree
/rotate @ArmThree 0 120 0
/move @ArmThree 46 38.5 0
/parametric torus 6 2
/tag_last Loop
/rotate @Loop -90 0 0
/move @Loop -46 2 -44
/view iso
/view fit
LICENSE: CC BY 4.0. Credit TrueGeometry. Made with TrueGeometry Playground.