Search results: bauble

Christmas tree bauble

super

Christmas tree bauble

Christmas tree decoration

Winter fox bauble

Print with 0.4 mm nozzle, 100% infill, first layer height 0.16 mm and the rest of the layers 0.08 mm. Start with black, at layer 10 change to white and at layer 19 change to orange.

Winter owl bauble

Print with 0.4 mm nozzle, 100% infill, first layer height 0.16 mm and the rest of the layers 0.08 mm. Start with black and at layer 11 change to white.

Snowy village bauble

Print with 0.4 mm nozzle, 100% infill, first layer height 0.16 mm and the rest of the layers 0.08 mm. Start with black and at layer 11 change to white.

Christmas Light up lithophane bauble

Openwork Christmas Bauble - Fixes for better printability

I fixed a few issues I had when printing the original by "frmdbl": Strengthened the prongs at the top by attaching them to each other with a ring, so it doesn't bend too much during printing and ruins overhangs. Thickened the bottom cone…

Hueforge - Christmas Bauble Tree Ornament 8 cm

Project: 17.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 80x85.39mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm…

Hueforge - Christmas Bauble Tree Ornament 8 cm

Project: slitta babbo natale.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 80x85.39mm in size You may print at higher layer heights below the Base Thickness of 0.72mm The Max allowed…

Spiral Bauble

Spiralised bauble that i modelled on Fusion360. The hook is universal with my other Christmas models, and it should just click on but sometime a bit of glue and/or sanding may be necessary depending on your printer's quality. I recommend…

simplistic style christmas bauble

absolutely any filament works, small length of 0.5mm diameter wire required for the topper to hang it but a small length of thread would also suffice. Hope this brightens some christmases! if you like this model, any donations would be…

Christmas Bauble

Day 8 of #scadvent - The OpenSCAD Advent Calendar 2025 https://openscad.org/advent-calendar-2025/

Christmas ornament , bauble

Bauble, Christmas tree ornament, 0.2 mm layer height, printed with supports. I used tri-color silk PLA for a better visual effect. Fuzzy Skin was applied between the raised sections. file bombka 2 is empty inside.

Photo frame - Christmas bauble

By default it was created to handle photos with diameter equal 90mm but it should be easy to scale it up/down You can print this model with multiple colors in pretty easy way (without AMSes etc) Just print it separatelly. First you need…

Silksong Hornet Christmas Bauble

This Christmas ornament is inspired by the opening scene of Hollow Knight: Silksong , where Hornet is trapped inside a carriage. The scene was reimagined as a decorative sphere with elegant, organic patterns :) You can use it as: A…

Christmas Bauble Santa Claus and Gifts

This Christmas Bauble Santa Claus and Gifts is a fun, 3D-printed decoration that really shines—especially when you add a mini LED sphere light behind the figure. The design comes in three configuration options: open back, full back cover…

Christmas Bauble Santa Claus and Reindeer

This Christmas Bauble Santa Claus and Reindeer is a fun, 3D-printed decoration that really shines—especially when you add a mini LED sphere light behind the figure. The design comes in three configuration options: open back, full back…

Christmas Bauble Santa Claus and Snowman

This Christmas Bauble Santa Claus and Snowman is a fun, 3D-printed decoration that really shines—especially when you add a mini LED sphere light behind the figure. The design comes in three configuration options: open back, full back…

Christmas Bauble Place Card Holder

Add a personal and festive touch to your dinner table with these place card holders shaped like classic Christmas ornaments. They are designed for versatility: Slot your name card directly into the top mount. Attach the card using a…

xTool F1 Ultra / F2 Ultra / F2 Ultra UV Christmas Bauble Jigs - 50mm & 100mm

Jigs for aligning Christmas Baubles in the centre of the platform for the xTool F1 Ultra, F2 Ultra and F2 Ultra UV. There is a jig for 50mm and another for 100mm baubles. One side has a notch for 12mm and the other for 20mm. These are the…

Espresso Christmas Tree Ornament Bauble

Simple, but cute design of a small espresso Christmas ornament. Nothing special but I hope you all appreciate the simplicity :D

Vase mode Christmas tree baubles

Set of Christmas baubles, printed in vase mode, no infill. Add brim or watch out for model fall. I printed without brim. There is a version with no hole to glue the topper attached on, and second with hole for hanging already there. You…

Coloured Christmas Stormtrooper Bauble

Coloured for the Bambu in 4 colours. Supports use are the auto tree supports. Original description from Printables is “Christmas ornament by Vlado Turek ”

little Planets - Christmas Baubles / Ornaments

A (part of a) 3d printed Mini-Universe for your Christmas tree – or year-round decoration. Each planet, moon or star is scaled down to an average diameter of 90mm. That results in a scale of 1 : 141.733.333,3 cm for the Earth 1 :…

Christmas Bauble Tree

Remix of 3DPrintBunny's "Snowflake Christmas Bauble". Only 1 star so it's easier to print.

Snowflake Bauble

Add a festive touch to your décor with this stunning snowflake bauble! Featuring two spirals that come together to create a dynamic shape, and a delicate snowflake core inside, this easy-to-assemble ornament is perfect for any holiday…

The Wombats Christmas Bauble (Waumble)

A Christmas Tree Bauble i designed based of the logo of The Wombats. Is this christmas? :) Category: Other

Microbit Christmas Baubles

I was looking for a cool design for my micro:bit on the Christmas tree and found Kitronik's ( https://kitronik.co.uk/blogs/resources/mipower-microbit-christmas-baubles ) page. Their perspex designs caught my eye. Since I don't have a…

Christmas bauble

bed 60 nozzle 210 speed 50 layer 0.2

Golden Snitch - Bauble Mod

A very easy to print mod for 40mm christmas baubles/ordnaments to turn them into the Golden Snitch from the Harry Potter movies. Print both parts from PLA at 0.15 mm layer hight with 4 perimeters . You will need a hairdryer or heat gun…

Coronavirus christmas bauble

Has removable tabs on one spike to properly align the spikes on the two halves when gluing. Print with supports (preferably tree supports). Attach thread or hook to hang.

Pop-up Santa Ornament - Christmas Xmas Gift, Toy, Bauble, or Decoration

Notes: Little Santa Claus that pops out of an ornament when you push back the lid! Gift this ornament, play with, or hang it on a tree Printing: I printed with 0.4noz, 0.2 layerh, gyroid, PETG for Santa, Silk PLA for the rest: Red Santa:…

Flat Pack Bauble

Flat pack bauble that can be printed in 3 sections and slotted together to form a 3D bauble. Can be printed as standalone or print two of the top flakes, instead of one top and one bottom, per bauble to string them together.

Christmas tree Quake bauble / ornaments

Here we have 2 simple models which can be used to adorn your christmas tree this year: A Nailgun Ammo crate A Med size health pack Print out the little parts in red, main body in green - or whatever you want really, glue them together,…

Bierflasche / beer / baubles

Es sind zwei Teile, die Bierflasche sowie dazugehöriger Kronkorken im Maßstab 1 : 2,5 Ich nutze dies als Christbaumkugel

Christmas #7 - Tree Ornaments Baubles Decorations

Looking for the perfect Christmas tree ornaments? This set of pre-designed 3D printable Christmas baubles is the answer. These ready-to-print are perfect for adding a festive touch to your holiday decor. Explore the collection for more…

Christmas #8 - Tree Ornaments Baubles Decorations

Looking for the perfect Christmas tree ornaments? This set of pre-designed 3D printable Christmas baubles is the answer. These ready-to-print are perfect for adding a festive touch to your holiday decor. Explore the collection for more…

Christmas tree ornament bauble with secret storage

Yet another Christmas tree decoration.

Vortex Christmas Bauble for single extruder!

A elegant vortex style crystmas bauble. You can print both parts seperate with your single extruder printer and assemble it together. That means that you have the two color look without the material waste of a multi filament system! I…

Hueforge - Christmas Bauble Tree Ornament 8 cm

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 80x85.39mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.7mm and the Actual Depth is 1.8mm…

Christmas bauble

Christmas bauble

Hueforge - Christmas Bauble Tree Ornament 8 cm

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 80x85.39mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.7mm…

Hueforge - Christmas Bauble Tree Ornament 8 cm

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 80x85.39mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…

Hueforge - Christmas Bauble Tree Ornament 8 cm

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 80x85.39mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.8mm…

Hueforge - Christmas Bauble Tree Ornament 8 cm

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 80x85.39mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2mm…

Hueforge - Christmas Bauble Tree Ornament 8 cm

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 80x85.39mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…

Christmas Bauble

An easy to print version of Christmas Bauble that can work either all white or Multi Color print. Can also be printed in

Christmas bauble decoration / Ozdoby vánoční

EN: Christmas baubles Three of them have option to use a name of your friend or family member instead of a word "Christmas" Use any 2 colors of your choice. CZ: Vánoční ozdoba na stromeček. 3 ozdoby mají možnost upravit si název textu na…

Christmas #12 - Tree Ornaments Baubles Decorations

Looking for the perfect Christmas tree ornaments? This set of pre-designed 3D printable Christmas baubles is the answer. These ready-to-print are perfect for adding a festive touch to your holiday decor. Explore the collection for more…

Christmas tree bauble

super

Christmas tree bauble

Christmas tree decoration

Christmas baubles on a branch

Layered print. 5 colors used. Christmas tree decoration.

'Merry Christmas' bauble

A hollow Christmas bauble featuring the text "Merry Christmas" elegantly wrapped around its surface. Use a resolution of 0.2mm or finer. You can attempt printing without supports, but organic or tree-style supports that only touch the…

Death Star Bauble

Death Star Bauble two half's print and glue together

Beautiful teddy bear, Santa Claus keychain, Christmas tree bauble

A beautiful teddy bear dressed as Santa Claus. You can use them as pins and bubbles for the Christmas tree, you just need to enlarge them in the slicer

Falling snowman key pin, Christmas tree bauble

Figurine of a falling snowman. Perfect pendant for your purse or keys. If you want to use it as bubbles, just enlarge it in the slicer

Christmas Bauble Earrings

Presenting: Christmas Bauble Earrings Fast and easy 1 color print. You can adjust the scale as desired. You can make it thicker, bigger etc.

16 Christmas Bauble Shaped Decors

Presenting: 16 Christmas Bauble Shaped Decors 4 plates with fast and easy 2 color prints. You can switch colors as you like. You can adjust the scale as desired. You can make it thicker, bigger etc.

Snowflake gear bauble

The models given are made using a FreePySCAD script inside SuperSlicer. If you want to create your own baubles, you need to have SuperSlicer and FreeCAD installed on your computer. Then you can download the attached python script and load…

Christmas Tree Bauble

Christmas tree bauble with overlapping strips on the top and bottom. Check out my other models here 👀 See my other Christmas models here 👀 Need some reindeers, try here 👀 Hope you enjoy and happy printing 😎

Voxel (block) Christmas Tree Bauble

Add some uniqueness to your Christmas tree with this Voxel (block) style Bauble. Check out my other models here 👀 See my other Christmas models here 👀 Need some reindeers, try here 👀 Hope you enjoy and happy printing 😎

Christmas Bauble

Celebrate the festive season with this beautiful Christmas-themed 3D model! This design features an elegant "Merry Christmas" inscription in a charming handwritten style, embossed for a stunning visual effect. The model is versatile and…

baubles- name tags

Printed with PLA. stnadard nozzle 0.4mm layer 0.2mm. Color change on the 10th layer

Pikachu Christmas Bauble

layer height = 0.15 speed = 100( Slow in ender printer ) infil =cubic 20% Material=Pla no supports Add a spark of festive cheer to your holiday décor with this adorable Pikachu Christmas bauble! Featuring Pikachu in a cozy winter hat,…

Lighted Christmas bauble

This illuminated Christmas ornament is 3D printed using SUNLU black PLA filament, ensuring a sleek and durable finish. The print features five solid walls and 100% infill for maximum stability and light diffusion. The design requires a…

Lighted Christmas bauble

This festive Christmas ornament is 3D printed with vibrant details, featuring intricate snowflake patterns and a reindeer silhouette. It is crafted using SUNLU black PLA filament for the base and SUNLU red PLA filament for the bauble. It…

Christmas #14 - Tree Ornaments Baubles Decorations

Looking for the perfect Christmas tree ornaments? This set of pre-designed 3D printable Christmas baubles is the answer. These ready-to-print are perfect for adding a festive touch to your holiday decor. Explore the collection for more…

Christmas Bauble - Animal Diorama

Discover this unique, two-dimensional Christmas ornament featuring a variety of animal motifs! A perfect decoration for animal lovers, families with young children, and anyone who enjoys exploring and marveling at intricate designs. Print…

Mario Mushroom Christmas Bauble (No AMS)

Super Mario Mushroom as Christmas decoration.

Kit Card - Christmas Bauble

Made this design for a simple christmas gift I could give out at work, and post to friends and family. A 2D kit card of a “shadowbox” christmas scene - simply pop the pieces of the kit card and assemble together using the slots to make a…

styrofoam bauble ball ornament hanger

If you make some Christmas baubles from Styrofoam balls you know that it's not an easy task to hang it on the tree. Metal pins tends to slide out over time. So I designed a quick and neat solution to this problem. How to print? Just print…

LED bauble

A lovely addition to the tree with a small side purchase of amazon 10pcs mini LED's or the alternative. plus its good for family time due to its easy to decorate with glitter sequins and much more. Happy Holidays 🎄❤ ( minimal shaping…

Christmas #15 - Tree Ornaments Baubles Decorations

Looking for the perfect Christmas tree ornaments? This set of pre-designed 3D printable Christmas baubles is the answer. These ready-to-print are perfect for adding a festive touch to your holiday decor. Explore the collection for more…

Geometric Christmas Baubles Set

Here is: Christmas Wall Decoration - Baubles Set - Geometric Design Fast and easy 1 color print. You can adjust the scale as desired, but be mindful not to make it too thin.

Darth Vader in a Bauble Solid Version

I added a background to this which allows for multi color print. It makes them stand out better on my tree. I thought others might like so I am sharing.

The Nativity of Jesus - Bauble Cristmas Ornament

__________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member of…

Winter Haven - Christmas Bauble Ornament

__________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member of…

Easy pine cone bauble

A Christmas bauble in vase mode, reminiscent of my childhood Christmas baubles in the form of pine cones. Easy and fast to print, and the cat can't crush it. Printed in red silk pla, and generic black pla.

Christmas bauble

Christmas, Christmas tree bauble, Christmas tree decoration

Wonky Christmas tree bauble

Add a touch of festivity to your home in under nine minutes by printing this whimsical Christmas tree bauble. Find more like this on my profile.

Christmas Tree - REMIX - Accessory Pack - Baubles and Star

I printed these accessories at 0.1mm layer height with 0.4mm nozzle. 2 walls, 12 top/bottom, 15% grid infill, no support. You can either print several baubles at once, very close together, or increase the minimum layer time (10 seconds+),…

Twisted Bauble Ball Christmas Tree Ornament

A hollow christmas tree ornament bauble with an interesting pattern. Easily printable thanks to integrated stabilizing fins (should be broken off after the print is done) and no extreme overhangs. To hang the ornament there's a separate…

Twisted Bauble Ball Christmas Tree Ornament V2

A hollow christmas tree ornament bauble with an interesting pattern. Easily printable thanks to integrated stabilizing fins (should be broken off after the print is done) and no extreme overhangs. This is an even twistier version of the…

Christmas tree with space for a bauble

My goal was to create a large illuminated Christmas tree with a bauble cutout that could be printed on printers with small 18x18cm work tables. Christmas tree is divided into three parts. The total height of the Christmas tree is 30.5 cm.…

Candy Bauble Ball Christmas Tree Ornament Set

This is a set of 3 christmas tree ornaments in a shape of a candy (sweet) in a wrapper. The difference is in the pattern: ribbed, striped or swirly. For best appearance, use new “Fuzzy Skin Painting” tool from PrusaSlicer 2.9.0 to paint…

Snowman bauble

Remix of https://www.thingiverse.com/thing:577310

Christmas donat bauble

Print with 0.4 mm nozzle where first layer height is 0.16 mm and the rest of the layers 0.08 mm. If you want to print color start with black, at layer 16 change to light blue, at layer 20 to orange and layer 25 for white.

bird cage bauble

Recently on reddit I was confronted with a SLS made christmas-ball kind of thing. It's basically a cage with a bird in it. Since I love challenges, I started to ask myself whether such a thing can be printed on a FDM printer as well.…

Christmas tree ball/bauble KIT

Hey! This is my first ever KIT so there might be mistakes and oversights. Was kind of a rush job as I needed several to gift for people at work. To help with that, the size is meant, so that, most printers, should fit 4. Ignore the…

Polar bear Christmas bauble

Print with 0.4 mm nozzle where first layer height is 0.16 mm and the rest of the layers 0.08 mm. If you want to print color start with dark blue, at layer 10 change to light blue and at layer 17 to white.

Christmas puppy 1 bauble

Print with 0.4 mm nozzle where first layer height is 0.16 mm and the rest of the layers 0.08 mm. If you want to print color start with black and at layer 15 change to white.

Christmas puppy 2 bauble

Print with 0.4 mm nozzle where first layer height is 0.16 mm and the rest of the layers 0.08 mm. If you want to print color start with black and at layer 15 change to white.

Kids building snowman bauble

Print with 0.4 mm nozzle where first layer height is 0.16 mm and the rest of the layers 0.08 mm. Start with black (or dark blue) and at layer 13 change to white.

Snowflake bauble

Print with 0.4 mm nozzle where first layer height is 0.16 mm and the rest of the layers 0.08 mm. Start with black and at layer 10 change to white.

Christmas Bauble

This wooden Christmas bauble can be used to place objects inside it for decoration. The flat bottom should allow enough adhesion to the print bed for the print. For the overhang at the top of the bauble, I used tree-like supports. I did…

Christmas bauble

A simple, flat bauble for pasting a photo or decoupage.

65mm (2.5") Christmas ball (bauble) light holding topper

This is designed to hold a balloon light on the top of a 65mm (2.5") Christmas ball (bauble).

Winter fox bauble

Print with 0.4 mm nozzle, 100% infill, first layer height 0.16 mm and the rest of the layers 0.08 mm. Start with black, at layer 10 change to white and at layer 19 change to orange.

Winter owl bauble

Print with 0.4 mm nozzle, 100% infill, first layer height 0.16 mm and the rest of the layers 0.08 mm. Start with black and at layer 11 change to white.

Snowy village bauble

Print with 0.4 mm nozzle, 100% infill, first layer height 0.16 mm and the rest of the layers 0.08 mm. Start with black and at layer 11 change to white.