1 / 2
Openwork Christmas Bauble 2025
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 2025 remix of my Openwork Christmas Bauble
- Rating
- 0 / 5
- Likes
- 95
- Downloads
- 354
- Makes
- 1
- Views
- 1,038
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print Settings
It's printed with a 0.4 mm nozzle, 0.2 mm layer height and no supports.
There's not a lot of room for infill, but I used 10%.
You might use brim and ‘avoid crossing walls’.
Don't use brittle materials like Matte PLA.
Other instructions
You can use a hanger stl from the original model.
You might also use a 10mm metal bauble hanger like i did on the first shot.