Openwork Christmas Bauble
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An openwork christmas tree bauble (includes a hanger/loop model)
- Rating
- 4.879 / 5
- Likes
- 989
- Downloads
- 3,111
- Makes
- 34
- Views
- 11,273
- Reviews
- 33
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial
Update 1# - I made the top cone have more support from below so it should print more easily, and reinforced the bottom fins.
I modelled this in Blender.
Print Settings
It's printed with a 0.4 mm nozzle, 0.2 mm layer height and no supports.
Don't print lower that 0.2 mm.
There's not a lot of room for infill, but I used 10%.
Other instructions
The model includes a base which is made so that it is stable on the print surface.
It needs to be cut off as shown on the last shot.
There's also a hanger stl in a separate file.
You might also use a 10mm metal bauble hanger like i did on the first shot.