Openwork Christmas Bauble
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An openwork christmas tree bauble (includes a hanger/loop model)
- Ocena
- 4,879 / 5
- Polubienia
- 989
- Pobrania
- 3111
- Wydruki
- 34
- Wyświetlenia
- 11 273
- Oceny
- 33
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
Update 1# - I made the top cone have more support from below so it should print more easily, and reinforced the bottom fins.
I modelled this in Blender.
Print Settings
It's printed with a 0.4 mm nozzle, 0.2 mm layer height and no supports.
Don't print lower that 0.2 mm.
There's not a lot of room for infill, but I used 10%.
Other instructions
The model includes a base which is made so that it is stable on the print surface.
It needs to be cut off as shown on the last shot.
There's also a hanger stl in a separate file.
You might also use a 10mm metal bauble hanger like i did on the first shot.