Vortex Christmas Bauble for single extruder!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A two parted bauble in the Vortex Style.
- Rating
- 5 / 5
- Likes
- 181
- Downloads
- 697
- Makes
- 6
- Views
- 3,096
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A elegant vortex style crystmas bauble.
You can print both parts seperate with your single extruder printer and assemble it together. That means that you have the two color look without the material waste of a multi filament system!
I only used some support for the base part that it will hold on the print plate, nothing else.
I printed it with PETG and used 2 perimeter with 0,6 line width and 0,3 height and it worked well. 20% Gyroid infill is recommended for the base part and the second part i printed with 0 infill.
My print is with 0,3mm gap and assembly was working, but i needed some force but maybe because of the rough 0,3 layer height, therefore i made also the second part with 0,5mm gap.
Also there is a version with some radii at the edges and one which is sharp if you like this more.
Would be happy to see your makes!