Christmas Rope Bauble Ornament Collection

Here you can find my Christmas Rope Bauble Ornament Collection.

There are different Designs:

Two ropes - single color

Two ropes - dual color

Four ropes - single color

Four ropes - only the ropes without sphere inside (if your printer is able to print it without the sphere inside)

Four ropes - dual color

Ten ropes - single color 

Ten ropes - only the ropes without sphere inside (if your printer is able to print it without the sphere inside)

Ten ropes - dual color

Ive printed the Two ropes - single color version with 3 perimeter, 0.2mm layer height and 20% lightning infill.

The filament is Prusament PLA Blend Viva La Bronze  and i printed it on my CR10-V2 with 215° nozzle and 50° bed temperature.

I used tree supports at angle higher then 60 degree.

You will need some supports because of the rope geometry which creates a lot of overhangs.

I have only a single color printer, so hopefully someone with a multi color will share a make of the dual color versions.

Take a look at my other models, there you can find some more ornaments for your christmas tree and some pendants and nacklaces in the same Design!

Would be happy to see your makes!