Openwork Christmas Bauble - Fixes for better printability
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I fixed a few issues I had when printing the original by "frmdbl":
Strengthened the prongs at the top by attaching them to each other with a ring, so it doesn't bend too much during printing and ruins overhangs.
Thickened the bottom cone so the inner perimeter has something to adhere to during printing.
Printing
Layer height: 0.2 (DO NOT print at lower layer height as it will put more pressure on and bend the many thin details and ruin overhang detail)
Perimeters: 3
Brim: On.
Inner perimeters first(default in Prusaslicer)
Avoid crossing perimeters: ON.
Speed on overhangs: Reduce them by 10-20%, depending on printer and preset.
Temperature: Lowest recommended for your filament.
Cooling: 100%, all the time(except first layers).
Infill: Whatever, there is no real need for infill in any part other than the temporary base.
Assembly
Same as for the original: Cut/saw off the base and press on the hanger(from original).