Wavy Bauble - Vase mode
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Traditional style bauble with a wave pattern
- Rating
- 4.765 / 5
- Likes
- 128
- Downloads
- 497
- Makes
- 17
- Views
- 2,080
- Reviews
- 17
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
For best results print with a .8 nozzle at .6 layer height in vase mode for a robust bauble that will print in ~20mins and use very little material.
This was designed using Slice-Up which is a tool for directly generating gcode so was really built around the .8 nozzle - I've then converted it from gcode into an stl - I haven't tested it with smaller nozzles yet but it is a watertight model so no reason it wouldn't work - I'd keep an eye on the print though if you try it just to be sure!
Recommend your standard nozzle/settings for the hanger which can just be glued on after printing :)
Photos are models printed in 3DJake two tone PLAs