Wavy Bauble - Vase mode
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Traditional style bauble with a wave pattern
- Ocena
- 4,765 / 5
- Polubienia
- 128
- Pobrania
- 497
- Wydruki
- 17
- Wyświetlenia
- 2080
- Oceny
- 17
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
For best results print with a .8 nozzle at .6 layer height in vase mode for a robust bauble that will print in ~20mins and use very little material.
This was designed using Slice-Up which is a tool for directly generating gcode so was really built around the .8 nozzle - I've then converted it from gcode into an stl - I haven't tested it with smaller nozzles yet but it is a watertight model so no reason it wouldn't work - I'd keep an eye on the print though if you try it just to be sure!
Recommend your standard nozzle/settings for the hanger which can just be glued on after printing :)
Photos are models printed in 3DJake two tone PLAs