今は Wordclock – Japanese Word Clock (8×8 Kanji, ESP32)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Japanese word clock: an 8×8 kanji grid tells the time in full sentences. ESP32 + CircuitPython, WS2812B LEDs.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
今は Wordclock – a Japanese word clock
An 8 × 8 grid of kanji and kana, lit from behind by 64 WS2812B LEDs. Every minute the clock forms a complete Japanese sentence that tells the time, for example:
今は午後十時四十八分です
ima wa gogo jū-ji yonjūhappun desu – "It is now 10:48 p.m."
All 64 characters are used. Optional: weekday, greetings (おはようございます! / おやすみ!), "exactly" (ちょうど).
FEATURES
- 285 × 285 × 40 mm, every part fits on a 300 × 300 mm bed in one piece
- Front panel printed in two colors: black with cut-out characters, 1.0 mm white as diffuser (one filament change, already embedded in the 3MF)
- Light grid with 64 chambers – no light bleeding between characters
- Base with LED channels and an open electronics tray on the back, keyhole hangers for the wall
- Optional desk stand (for straight or 90° USB-C plugs)
- Firmware: Adafruit Feather ESP32 V2 with CircuitPython – NTP time, automatic day/night brightness with a VEML7700 light sensor, web interface (German/English) with live view, color picker, demo and test mode
FILES
- wordclock_jp_front – front panel (face down, color change at 1.8 mm)
- wordclock_jp_raster – light grid
- wordclock_jp_boden – base with electronics tray
- wordclock_jp_staender_gerade / _winkel – desk stand (optional)
- wordclock_jp_luxadapter_2mm / _4mm – light sensor adapter (only needed for old bases, ignore it)
- Test pieces: front strip 日曜日 (with color change), diffuser test, base section
The 3MF files are already oriented for printing – just load them, do not rotate.
PRINT SETTINGS
- Printer: Prusa CORE One L+ (any printer with 300 × 300 mm bed)
- PLA, 0.4 mm nozzle, 0.2 mm layers, 15 % infill
- No supports needed – check the preview of the front: no support material may end up inside the characters
- No brim: the large parts have mouse ears at the corners – break them off after printing
- Front: about 7 h, 200 g. Satin sheet gives a nice matte face.
- At the color change: purge white until it comes out pure white – any black residue shows when the LEDs are on
TIP: print the test strip 日曜日 first (short print). It contains the most complex character 曜 and the color change.
HARDWARE
- Adafruit Feather ESP32 V2
- WS2812B LED strip, 30 LEDs/m, 10 mm wide (about 2.2 m, 8 × 8 LEDs)
- Adafruit VEML7700 light sensor (STEMMA QT) + cable – optional
- Adafruit USB-C breakout (4090), USB-C Y-cable, 5 V / 3–4 A USB-C power supply
- 1000 µF capacitor, 330–470 Ω resistor, wires
- Screws: 4× M3×12, 10× M3×12 countersunk, 8× M2.5×6 self-tapping
ASSEMBLY (SHORT)
1. Stick the LED strips into the channels of the base, one strip per row, serpentine wiring
2. Route the cables through the slots to the back and connect the rows there
3. Mount Feather, USB-C breakout and light sensor in the tray, flash the firmware, test all LEDs with the test mode
4. Put the light grid onto the base, screw it from the back
5. Screw the front onto the grid
FIRMWARE, CAD SOURCES AND FULL DOCUMENTATION
Everything – firmware, parametric CAD scripts (Python), parts list, wiring, web interface and troubleshooting – is on GitHub:
https://github.com/thomassadowsky/Wordclock-Japan
LICENSE
3D models: CC BY 4.0 · Code: MIT
Character shapes from Noto Sans CJK JP (SIL Open Font License).
Developed with help from my best developer buddy Claude (Anthropic).