1 / 2
Yellow Sticky Trap Holder / Gelbtafelhalter für Zimmerpflanzen — zdjęcie 1
1 / 2

Yellow Sticky Trap Holder / Gelbtafelhalter für Zimmerpflanzen

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

eng: holder for yellow sticky traps de: Halter für Gelbtafeln

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
7
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

English

Description

This is a simple 3D printable holder for yellow sticky traps, designed for use in flowerpots and indoor plants.

Yellow sticky traps are commonly used to catch fungus gnats and other small flying insects. Unfortunately, placing them directly into the soil can be inconvenient, especially when the adhesive surface comes into contact with leaves or other parts of the plant.

I designed this slim holder to keep the sticky trap upright and securely positioned in the flowerpot.

The small slots allow the sticky trap to be attached to the holder, while the pointed end makes it easy to insert into the soil.

Its simple, compact design makes it easy to print and use without taking up unnecessary space in the flowerpot.

Features

  • Holder for yellow sticky insect traps

  • Ideal for indoor plants and flowerpots

  • Helps keep sticky traps upright

  • Reduces unwanted contact between the adhesive surface and plant leaves

  • Slim and space-saving design

  • Pointed end for easy insertion into potting soil

  • Integrated slots for attaching the sticky trap

  • Simple one-piece construction

  • Easy to print

Print Settings

The holder is designed for straightforward 3D printing.

Recommended settings:

  • Material: PLA or PETG

  • Infill: 15%

  • Walls / Perimeters: 3

  • Supports: not required

PLA is perfectly suitable for normal indoor use. PETG can be a good alternative if additional flexibility or moisture resistance is desired.

Installation

  1. Print the holder.

  2. Attach the yellow sticky trap using the integrated slots.

  3. Insert the pointed end into the soil of your flowerpot.

  4. Adjust the position so that the adhesive surface does not touch the leaves.

The holder can be reused when replacing the sticky trap.

________________________________________________________________________________________________________________________________

Deutsch

Beschreibung

Dies ist ein einfacher 3D-druckbarer Halter für Gelbtafeln, der speziell für den Einsatz in Blumentöpfen und bei Zimmerpflanzen gedacht ist.

Gelbtafeln werden häufig verwendet, um Trauermücken und andere kleine fliegende Insekten zu fangen. Werden die Klebefallen direkt in die Erde gesteckt, kann es allerdings passieren, dass die Klebeflächen mit Blättern oder anderen Pflanzenteilen in Kontakt kommen.

Deshalb habe ich diesen schmalen Halter konstruiert, mit dem sich Gelbtafeln einfach und sicher im Blumentopf positionieren lassen.

Über die kleinen Schlitze wird die Gelbtafel am Halter befestigt. Das angespitzte Ende ermöglicht anschließend ein einfaches Einstecken in die Blumenerde.

Durch die schlanke und kompakte Bauform benötigt der Halter nur wenig Platz im Blumentopf und lässt sich unkompliziert drucken.

Eigenschaften

  • Halter für gelbe Insekten-Klebefallen

  • Ideal für Zimmerpflanzen und Blumentöpfe

  • Hält Gelbtafeln aufrecht und in Position

  • Reduziert unerwünschten Kontakt der Klebeflächen mit Pflanzenblättern

  • Schlanke und platzsparende Konstruktion

  • Angespitztes Ende zum einfachen Einstecken in die Blumenerde

  • Integrierte Schlitze zur Befestigung der Gelbtafel

  • Einteilige Konstruktion

  • Einfach zu drucken

Druckhinweise

Der Halter ist für einen unkomplizierten 3D-Druck ausgelegt.

Empfohlene Einstellungen:

  • Material: PLA oder PETG

  • Infill: 15 %

  • Wände / Perimeter: 3

  • Support: nicht erforderlich

PLA eignet sich problemlos für den normalen Einsatz im Innenbereich. PETG kann eine gute Alternative sein, wenn etwas mehr Flexibilität oder Feuchtigkeitsbeständigkeit gewünscht ist.

Montage

  1. Den Halter ausdrucken.

  2. Die Gelbtafel mithilfe der integrierten Schlitze am Halter befestigen.

  3. Das angespitzte Ende in die Blumenerde stecken.

  4. Die Position so ausrichten, dass die Klebeflächen möglichst nicht mit den Blättern in Berührung kommen.

Beim Austausch der Gelbtafel kann der Halter einfach wiederverwendet werden.

Tagi