IKEA MAXIMERA Gridfinity Bin - Scoop & DYMO Label Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IKEA MAXIMERA Gridfinity bin with rounded corners, finger scoop and 12 mm DYMO label shelf. Mirrored version included.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
A practical remix of the IKEA MAXIMERA Gridfinity-compatible bin, keeping its drawer-fitting shape while making small items easier to retrieve and the contents easier to label.
The main improvement is inside the container: rounded internal corners and a generous finger scoop replace the awkward sharp transitions at the bottom. Sweep screws, washers, or other small items toward the scoop end and slide them up the curved wall, rather than trying to pinch them out of a corner.
At the opposite end, a full-width label shelf with solid support underneath provides a continuous, flat surface for adhesive labels. Its 13 mm usable depth accommodates 12 mm DYMO tape, leaving approximately 0.5 mm of clearance on either side when centred.
The rounded rim and exterior corners give the bin a more consistent Gridfinity-style finish, while preserving the original overall size and tapered side profile.
Both standard and mirrored versions are available for opposite sides of the drawer. These are genuinely mirrored parts—not simply rotated copies—so the label and scoop stay at the same ends in a matching pair.