Lightning to 3.5mm Audio Dongle Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder for an Apple Lightning to 3.5mm Audio jack dongle.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 619
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a holder for an Apple iPhone / iPad Lightning to 3.5mm Audio jack dongle / adapter.
It is rounded underneath to fit better on the side of iPhone cases, and has two small holes on one side that you can use with a stiff wire to make a clip. (Plastic printed clips just immediately break, do yourself a favor and use some metal for this part.)
You don't have to remove it from the holder to use it, the Lightning plug extends past the holder a bit.
The dongle should snap in. You may have to press a bit on the parts where the wire connects for them to snap it. I made it tight on purpose so they're compressed a bit and are held firmly. I didn't want the adapter popping out and getting lost.
I've included the Fusion 360 file so it should be easy to edit with that application
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.12mm
Infill:
20
Filament:
Generic PLA
Notes:
I printed at 20mm/sec with full cooling and did not need supports underneath despite the overhang. You may want to try adding some supports if you're having issues. I recommend using a brim instead of skirt or rafts.
Category: Mobile Phone