Pimoroni Presto Case with Wall Mount, Magnetic & Battery Options
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slide-on Presto case in multiple variants, with optional battery and LiPo Amigo Pro space and a power switch actuator.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- BSD License
Bought a Pimoroni Presto without a stand, and it's currently hanging in the breeze? These cases will enclose your precious touch screen and provide a base for you to expand it in any way you can imagine!
There are three variants - one for the Presto alone, one with space for a 2000mAh battery and one with space for a high capacity 6700mAh battery. The two battery cases also include room for a LiPo Amigo Pro (and again), so that you can charge up without having to remove the case! They also have a built-in actuator for the power switch on the LiPo Amigo, providing on/off functionality at your fingertips. Each variant comes in three kinds - one with no fittings, one with a fitting to hang on a screw or nail, and one with spaces for 6x2mm neodymium magnets.
The cases are made with 45 degree angles for ease of printing. The STEP files are included, so that you can add to the design in any way you want. The case just slides over the assembled Presto as a friction fit - we recommend fitting everything into one half and then sliding the other half over to meet it.
Test prints were made on a Bambu X1C - the standard 0.2mm preset gave great results, but you should enable supports - standard or tree is up to you. Print with the centre line of the casing against the build plate, and watch out if you've got particularly good adhesion and when removing supports - the actuator for the LiPo Amigo power switch can be fragile.