Liczymy pasujące modele…
A simple little Preston single channel Iris control holder for 8 rings. Also has room for a 9mm P touch label on the front. It's made a bit beefy to resist heat when printing with PLA. Take about 13 Hours to print. 7.6" Length x 3.5"…
This is a remix of the fantastic Preston single-channel iris holder by Digital Imaging Technician Eduardo Eguia. There is no website to link to for this item, but I have linked to Eduardo's IMDb page. This has been posted here with his…
I never liked how the antenna would protrude beyond the thickness of the MDR3 so I designed this to replace the stock antenna cage. Reuse the stock screws. It is a bit fiddly to screw in the antenna once installed, might be something to…
Gridfinity Watchmaker Bergeon Presto Tool Storage
This is a simplified version of Chromatic Pic's excellent design. Uses a fair bit less filament so it prints faster and is economical! PRESTON RING HOLDER 8U will hold 8 preston single channel rings. This is only printable on a Prusa MK4…
Remixed wlfgng 's cinelock cradle to use with Preston hand units. I printed in PA-CF, but should be fine in ABS or PETG. Probably PLA too.
Use your Presto food dehydrator as a filament dryer, without any destructive changes that would interfere with using it for its original designed purpose. Concept inspired by thing #4856292 , but redesigned from scratch. I really liked…
I reccomend printing this at 100% infill in PETG for the best results. The bottom row of holes are made for 1/4-20" 3/16 socket cap screws. The VIU is best mounted with velcro, however there are included holes for the appropriate 8-32…
A customer ordered a custom Nike Presto React keychain via Instagram so here is the model if anybody wants to print it themselves. If you printed it feel free to share your prints in the “makes” tab and leave a comment letting us know if…
Inspired by Seanswee's “Simplified Preston Iris Ring Holders”, I created these iris ring holders with taller side walls to reduce the chance of any rings accidentally rolling away during those curb-hopping cart moves. The front and back…
This is a 3D model of a router plane designed in the early 20th century, originally patented by Edward Preston (now expired). I made this model using photographic references. Since hand planes often use pre-standard threads, I chose the…
I have some BIG spools of PETG (14" across) that needed to be dried, and it just so happens that the fit in the diameter of the Presto brand food dehydrator from Walmart. I designed these dryer sections to hold filament spools up to…
Split into 3rds to allow for printing on a 350mm bed. Removed bottom as well. Glue together.
This is a tray for drying desiccant beads in a food dehydrator. I use a Presto dehydrator. I cut the bottoms of most of the trays out for drying filament spools. This tray fits within the rings. Drying at 74° C for a few hours seems to…
Finding myself doing a job where I had more lenses needing iris rings than I had rings available I decided to just model and print the rings I needed. This was modeled specifically to match the thickness and fit of stock rings, and was…
I designed this to fit a PTFE filament guide tube to my Presto brand dehydrator. The tube hole is exact tube dimensions. Depending on your printer and preference, the tube may be too tight. If so, just drill it out after printing to get…
My print was at 0.12mm layers in Sunlu PETG.
1x1 Gridfinty bin designed to hold a Presto pen as well as either 2 Sharpies, 2 pens, or one of each. Gridfinity Introduction video by Zack Freedman:
🎣 Preston ICS XL Feeder Organizer / Ladder – Clean & Functional Storage Solution A dedicated organizer (ladder) designed specifically for the Preston ICS XL feeder system, created to keep your rigs neat, secure, and always ready to use.…
The Pentel Presto! Correction pen is great for labeling things around the shop with a fast drying bright white ink (a favorite of Adam Savage). The directions say to store it point up with the cap on. This print is a small removable…
Updated code: https://github.com/truglodite/Dehydrator I decided to hack my Presto 6302 food dehydrator to control it with an Arduino 328p. The result is a smart dehydrator that uses a table of drying profiles (temperature and time) based…
A wall-mounted holder for a Presto Kitchen Digital Timer (model 0421301). It is fitted exactly to this model. I needed something to hold this timer near my desk, so I could easily find it without having to search around in a drawer. It's…
These are simple 1x1 Gridfinity bins that perfectly fit Presto correction pens. I have uploaded two variants, one that holds a single pen and one that holds two pens. The pens say they recommend storing them tip up, which this does.…
Designed this to hold the cord and controller for our Presto brand griddle. May work for other brands too. I used double-sided mounting tape to stick it to the inside of my cabinet door where the griddle is stored. Could also use a…
Keep the light and the reflecting glass, transform the cheap rear frame light to a multipurpose clip light, suitable for btwin saddle bag. Print in translucent red for maximum light, to be visible from the side also! Designed in…
[eng] Reduction to the Preston arm(22mm) Guru umbrella (16mm)
Designed for Presto 12-cup percolator. You may have some stringing between the tall prongs. The tips of the prongs are to prevent installation of the percolator top by accident. Insert the wrap-around filter most of the way down by hand…
As there are different versions of the Presto tool, I added three different models. One without any number on it, then number 1 and number 6. Have fun and Regards. Werner
Replacement end cap for Preston DM-1X motor to accommodate a Smallrig “Universal Spring Cable Clamp” (MD2418), for cable strain relief. Hole is sized for a ¼-20 heat-set insert. Use original screws to fix the end cap back on the motor.…
For all your Presto! Fine Point Jumbo correction pen holding needs!
The sensor stick from Pimoroni to add air temperature, pressure, air quality and an accelerometer to the Presto desktop display had no mounting on the Presto. So rather than just have it hanging off a cable, I made this clip with mount it…
This is a 200mm wide scaled up version of the PRESTO card. It includes a slot for an actual PRESTO card so you can actually use this giant card to ride public transportation. It is recommended to print the two halfs separately and gluing…
Side Storm lateral plate support for 30mm legs print petg o asa
White until 5mm Light blue until 6mm Finish with dark blue
Carafe to replace the glass one that comes with a Presto Dorothy cold brew coffee system.
I was unhappy with the stand the of the figure (it is naturally understandable why as a crane prize, they went with this to me) came with so I decided to make a replacement. This works by printing a small adapter that fits the figure on…
Bought a Pimoroni Presto without a stand , and it's currently hanging in the breeze? These cases will enclose your precious touch screen and provide a base for you to expand it in any way you can imagine! There are three variants - one…
When I use my Presto pressure cooker, the lid lock often fails to raise when the pot is coming to pressure. This results in a significant amount of steam escaping and a lack of pressure buildup. To fix this, I often prop the lock closed…
Designed this to hold the cord and controller for our Presto brand griddle. May work for other brands too. I used double-sided mounting tape to stick it to the inside of my cabinet door where the griddle is stored. Could also use a…
