OCTI - 3D Printing Little Helper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
OCTI - My 3D printing little helper. --------------------------------------------- Raspberry Pi Zero/Zero2 with POE…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 604
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
OCTI - My 3D printing little helper. ---------------------------------------------
Raspberry Pi Zero/Zero2 with POE hat mounting case for Ender 3 Printers.
(POE = Power Over Ethernet)
Mounting base:
2 options: centred or side mount. Depends where you want to mount this.
At first i had it mounted on the base rails using side mount. Had about 1 - 2 mm gap between RPi zero case and bed wheels (photo attached for reference).
After installing CR-Touch stock z-stop no longer needed so i had 2 spare sets of screws and t-nuts. Used them for this project.
Support
For mounting base and lid. Screw holes has been cut out to make screw heads flush with the print. Screws are the same which comes with Raspberry Pi standoff.
Lid needs to be printed upside-down.
Housing
Fan cut out slot for 40x40x10mm RPi fan.
RPi Cam mount arm
Made to fit Ender 3 V2 cable tension cover.
Camera cover : https://www.thingiverse.com/thing:3499687. Using Tinkercad i added camera lid in to mounting arm.
Disclaimer:
Not for commercial Use. Feel free to remix. Make sure you put credits.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Infill:
20%
Filament:
Jayo PLA+
Grey
Notes:
Supports required for screw holes (mounting base and lid)
Print lid upside-downHow I Designed This
Category: 3D Printer Accessories