1 / 1
Xtool P2S nozzle V2 and V3 for F25.4, F38.1 and F50.8 lenses — zdjęcie 1

Xtool P2S nozzle V2 and V3 for F25.4, F38.1 and F50.8 lenses

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

In order to get a tight fit you need preferably an ~1mm thick silicone gasket and the 20mm dia lenses.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
32
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial

In order to get a tight fit you need preferably an ~1mm thick silicone gasket and the 20mm dia lenses.

No need for separate tightening tool like V1 needed.

only thing is the hose connector needs to be inserted in such way that it tightens to the right side of nozzle.

V2 is without removable threaded tip 
V3 has threaded removable tip (idea from P3) where engravings might clogg the nozzle if nozzle hole is small.