1 / 1
Xtool P2S nozzle V2 and V3 for F25.4, F38.1 and F50.8 lenses
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
In order to get a tight fit you need preferably an ~1mm thick silicone gasket and the 20mm dia lenses.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
In order to get a tight fit you need preferably an ~1mm thick silicone gasket and the 20mm dia lenses.
No need for separate tightening tool like V1 needed.
only thing is the hose connector needs to be inserted in such way that it tightens to the right side of nozzle.
V2 is without removable threaded tip
V3 has threaded removable tip (idea from P3) where engravings might clogg the nozzle if nozzle hole is small.