Dungeon Crawler Carl Inspired Race Bib Magnets - Pin-Free Bib Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dungeon Crawler Carl inspired race bib magnets with a two-tone color-change design. 8x3 magnets replace safety pin.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Dungeon Crawler Carl Inspired Race Bib Magnets
These race bib magnets are inspired by the Dungeon Crawler Carl books and designed for runners who want their race-day gear to have a little more personality.
I used standard format from my Race Bib Magnets.
The decorative front pieces are designed as two-tone prints. The final top layer uses a filament color change, allowing the themed detail to stand out without requiring an AMS or multi-material system.
Like a standard magnetic bib holder, the front and back pieces clamp the bib to your shirt using magnets. No safety pins, no holes in your race shirt, and no struggling with pins before the start line.
Features
- Dungeon Crawler Carl inspired design
- Two-tone print with a final-layer color change
- Pin-free race bib attachment
- No holes in race shirts
- Fast setup and removal
- Designed for 8x3 mm neodymium magnets
- Great for 5Ks, fun runs, themed races, and book-fan runners
Hardware required
- 8x3 mm neodymium magnets
- One front piece and one backing piece per bib attachment point
- Super Glue, if needed
How to use
1. Place the backing magnet behind your shirt.
2. Position the race bib on the front.
3. Place the themed front magnet over the bib.
4. The magnets hold the bib and shirt together.
Printing notes
- Use a filament change at the final top layer to create the two-tone effect.
- No AMS or multi-material unit is required; a manual filament change works.
- Designed around 8x3 mm neodymium magnets.
- Confirm magnet polarity before permanently attaching the magnets.
- Test holding strength with your actual bib and shirt before relying on them during a race.
