1 / 2
Furniture Risers - Set of Four Bed and Sofa Lifters, 50 mm, Leg Cup on Top (OpenSCAD) — zdjęcie 1
1 / 2

Furniture Risers - Set of Four Bed and Sofa Lifters, 50 mm, Leg Cup on Top (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Four risers that lift a bed, sofa or desk by 50 mm, with a cup on top that holds the leg.

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
20
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Lift a bed, sofa, desk or cabinet to make room for storage underneath or to raise a desk. Each riser has a cup on top that holds the leg, a wide base, and a hollow cone inside so it's light but solid where the weight goes.

DETAILS

• Lifts 50 mm. Cup 60 mm across, 12 mm deep (round legs, or square legs up to about 42 mm). Base 92 mm.

• Prints with no supports: the hollow underneath has a 45-degree cone roof. Bambu Studio: 7 h 51, 306 g for four.

• For heavy furniture use 5-6 walls and 30% infill or more, and check the riser before you sit or lie on it.

CUSTOMIZE (OpenSCAD)

Lift height, cup size and depth, and how many to print.

Designed with AI assistance (OpenSCAD). Rendered images; not printed or load-tested yet.

Tagi