Furniture Risers - Set of Four Bed and Sofa Lifters, 50 mm, Leg Cup on Top (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Four risers that lift a bed, sofa or desk by 50 mm, with a cup on top that holds the leg.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Lift a bed, sofa, desk or cabinet to make room for storage underneath or to raise a desk. Each riser has a cup on top that holds the leg, a wide base, and a hollow cone inside so it's light but solid where the weight goes.
DETAILS
• Lifts 50 mm. Cup 60 mm across, 12 mm deep (round legs, or square legs up to about 42 mm). Base 92 mm.
• Prints with no supports: the hollow underneath has a 45-degree cone roof. Bambu Studio: 7 h 51, 306 g for four.
• For heavy furniture use 5-6 walls and 30% infill or more, and check the riser before you sit or lie on it.
CUSTOMIZE (OpenSCAD)
Lift height, cup size and depth, and how many to print.
Designed with AI assistance (OpenSCAD). Rendered images; not printed or load-tested yet.