1 / 2
Spaghetti Measure - 1 to 4 Portion Pasta Gauge with Hanging Hole (OpenSCAD) — zdjęcie 1
1 / 2

Spaghetti Measure - 1 to 4 Portion Pasta Gauge with Hanging Hole (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Measure dry spaghetti: fill a hole for 1, 2, 3 or 4 portions, then hang it back on its hook.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
26
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Never cook too much pasta again. Fill a hole with dry spaghetti for 1, 2, 3 or 4 portions (about 85 g each), and hang it on a hook by the end hole.

DETAILS

• 210 x 66 x 4 mm. Holes 22, 31, 38 and 44 mm, numbered.

• Prints flat with no supports. Bambu Studio: 37 min, 17 g.

• Portions are approximate and depend on the spaghetti's thickness. Use a food-safe filament if you're picky, and don't put it in the dishwasher if it's PLA.

CUSTOMIZE (OpenSCAD)

Hole sizes and thickness.

Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.

Tagi