Ender 5 (PRO / PLUS) Mercury One Ethernet Skirt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clean way of routing you SBCs RJ45 port to the outside of the printer.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a way to route the RJ45 port of my raspberry out of my ZERO G Mercury One electronics bay so i made this skirt version.
For assembly instructions just refer to the original zero g documentation.
It is spilt so that you wont have to use supports.
It uses the original screws for mounting and then 2x M3*4*4.2 Heatset insets (the marked holes in the pic) and 2 M3*6 or M3*8 countersunk screws (anything over 6mm works). The RJ45 Backer gets glued onto the Skirt guided by 4 posts.
The RJ45 Keyjack is this one:
https://de.aliexpress.com/item/1005008403150593.html?spm=a2g0o.order_list.order_list_main.417.60d85c5fhQJxlf&gatewayAdapt=glo2deu
this one should also work:
https://www.amazon.de/dp/B0FQNH5GSG/ref=twister_B0FQPP2T8K?_encoding=UTF8&psc=1
Any questions just ask.