Reverse-Engineered Crunch Labs launcher discs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are my reverse-engineered launcher discs that are possibly better than the originals, and no supports are needed!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We both know the discs in the box are getting lost in the house, now you can have even more of them lost in the house, and in different colors! Haha! They fly fast and true, maybe even better than the originals. Can easily be printed in about 10-11 minutes. Or you can fill the build plate and get a dozen or more at a time.
Reasoning
Of all the replacements available I couldn't locate any that have the fully curved "frisbee" profile of the original disc, so I made my own. This one matches the 4mm curved profile of the edge.
The minimum post variation reduces the overall weight to 1.9g. For reference the originals were 2.0g on my scale, and is our preferred version.
Designed specifically with 3D printing in mind. Vertical walls are 0.8mm thick (2 extrusions), and the flat surfaces are 0.64m thick (4 layers of 0.16mm), the overhang of the sides begins at 40 degrees, and slight strain relief has been added to the inside corners.
All other key measurements and geometry are taken directly from the original part including the slight overhang of the curved lip of the disc. There are 3 variations:
Full height post:
Minimum height post
No Post
Recommended Print Settings
Arachne line generator
0.4mm nozzle
0.16mm layer height (critical for the geometry)
Random seam
Material: PLA is more than strong enough, but can be printed in whatever you've got a scrap of
Print orientation: As model is imported with 'open' side facing up