Wyniki wyszukiwania: crunchlabs

Crunchlabs irturret - stepper mod

Modifying the Crunchlabs irturret for stepper motors NOTES: The plastic is too soft for the azimuth bracket, so it's increasingly sloppy.

Crunchlabs Diploma Holder

These are brackets to hold the Crunchlabs crunch box diploma. I do them with my son and wanted to mount his diplomas on the wall. Just print 2 of them for each diploma. I used Command Strips to mount them to the wall while holding the…

Mark Rober's Crunchlabs logo coin & keychain

Spiky Disc for Crunchlabs

This is a spiky version of the flying disks in one of the crunch labs build boxes. Be careful, this is a US-Military grade weapon. Thanks so much!

CrunchLabs Trip Wire T-Leg

This is a replacement leg for the CrunchLabs Trip Wire kit. When my kid broke the leg to his kit, I found one of the two on Printables (https://www.printables.com/model/495639-crunch-labs-build-box-trip-wire-legs), but not the second leg.…

CrunchLabs IR Turret Rolle

Beschreibung: Ersatz Rolle für die IR Turret von CrunchLabs. Das original dreht sich nicht leicht genug, die Magnete sind vermutlich zu stark. Das obere und das untere Endstück der Rolle sind original von CrunchLabs hier zu finden:…

Larger Hopper for CrunchLabs Disc Shooter

I believe printing upside down should eliminate the need for supports. This installs the same way as the original. Just holds a LOT more discs.

CrunchLabs BuildBox Disc Launcher Bumper

This is a replacement bumper for the squishy, quarter-circle that guides the CrunchLabs Disc Launcher flying discs at launch. Easy to print and works with any material. Use your standard print settings.

Crunchlabs irturret - stepper mod

Modifying the Crunchlabs irturret for stepper motors NOTES: The plastic is too soft for the azimuth bracket, so it's increasingly sloppy.

IR turret CrunchLabs, io1 ver.

DIY IR Turret - Inspired by CrunchLabs' HackPack This is my own 3D-printable version of the IR Turret inspired by CrunchLabs' HackPack. I built this project as a personal challenge after realizing the kits weren’t available in my country…

CrunchLabs - Build Box - Paper Airplane Launcher Right Cam

The teeth on the right cam in our kit arrived damaged. Crunchlabs is sending a replacement part for free but I took this as an opportunity to practice replication design in fusion. Note this is the right cam only and it's not 100% perfect…

IR Turret Crunchlabs, io1 ver. V2.0

DIY IR Turret V2.0 - Inspired by CrunchLabs' HackPack This is the SECOND version of my own 3D-printable version of the IR Turret inspired by CrunchLabs' HackPack. I built this project as a personal challenge after realizing the kits…

Replacement Syringe Plunger for Crunchlabs 'Wet Bandit' Build Box

Made/Designed based on the existing syringe plunger out of the crunchlabs ‘Wet Bandit’ build box. The original, in this case, had been broken in an unfortunate accident while hurriedly running up stairs… Someone else may have been…

Mark Rober CrunchLabs: Disc Launcher Upgrades

Some stuff that can be used to upgrade the disc launcher creation in the Mark Rober build box.

Crunchlabs Propeller Launcher 4 Blade Propeller

A simple modification of the original 3d printed propeller for the Crunchlabs Propeller Launcher Build Box created in an attempt to answer the question - 'Would it go higher with more blades?' The actual answer doesn't appear to be…

Crunchlabs Coin Spinner paddle replacement

My kids flicked so many coins the first day that the flicking edge got dented on one, and that led to fights about who had the "better" one. I don't have a glowforge so I recreated the shaped piece and printed it with PETG. Perhaps a PLA…

Crunchlabs Diploma Holder

These are brackets to hold the Crunchlabs crunch box diploma. I do them with my son and wanted to mount his diplomas on the wall. Just print 2 of them for each diploma. I used Command Strips to mount them to the wall while holding the…

Mark Rober's Crunchlabs logo coin & keychain

CrunchLabs Platinum Ticket Replica

CrunchLabs Platinum Ticket Replica

Crunchlabs Disc Launcher discs

Two variations on the disc included in the Crunchlabs "Disc Launcher" build box. One is true to the injection molded version included in the box, complete with the inside curve of the disc made vertical to avoid the negative space that…

CrunchLabs Build Box #1 Disc Launcher Disc

CrunchLabs has monthly build boxes with crafts. Build Box #1 is a disc launcher that comes with six discs. Your kid will probably ask you to print them some more discs. Mine did. Printed at .2mm layer height, no support, no brim/raft, in…

CrunchLabs Disc Launcher Disc and Hopper Extension

Replacement Discs for the CrunchLabs Disc Launcher project. Also an extendable hopper that can hold 6 additional discs. Multiple hoppers can stack and be secured together with rubber bands as pictured. The discs don't fly quite as far as…

CrunchLabs Disc Launcher Alternative Discs

CrunchLabs is a subscription box engineering kit designed by Mark Rober. CrunchLabs Box 1 is a disc launcher using a flywheel to throw small plastic discs. This project has variations on designs to get different results. Try them out and…

CrunchLabs Disc Launcher Cap

Mark Rober made a subscription kit, CrunchLabs, and the first build is a disc launcher. I found that the discs kept flipping over, and it would not work when the discs are upside down. This cap will keep the discs upright because of the…

CrunchLabs Disc and Disc Cartridge Extendor

This is a modification to CrunchLabs Disc Launcher to allow for more than 6 discs. Print Disc with 0.15mm layers. Extender can be 0.3mm layers.

Crunchlabs Disc Launcher Parts

Printing: No supports, 15-20% infill, 3-4 walls. Assembly: Assembles just like original parts, but bigger.

IR Turret Buzzer Mount - CrunchLabs Hack Pack 001

IR Turret Buzzer Mount - Crunch Labs Hack Pack 001 Overview This is a 3D-printed mount designed to securely hold a buzzer onto the CrunchLabs IR Turret from the Hack Pack. The buzzer allows you to play different tones while firing the…

IR Turret PIR Motion Sensor Mount - CrunchLabs Hack Pack 001

IR Turret PIR Mount - Crunch Labs Hack Pack 001 Overview This is a 3D-printed mount designed to securely hold a PIR motion sensor ( Keyes PIR Motion Sensor Module HC-SR501 ) onto the CrunchLabs IR Turret from the Hack Pack. This lets you…

IR Turret Nerf Dart (no rubber band)- CrunchLabs Hack Pack 001

IR Turret Nerf Dart - Crunch Labs Hack Pack 001 Overview This is 3D-printed replacement ammunition. No rubber band is required . The spring is 3D-printed. 3D Printing Info Print Time : Approximately 30 min on Prusa MK4 Material : PLA/PETG…

CrunchLabs - Disk

When you get the disc launcher (https://www.crunchlabs.com/products/disc-launcher), you have 6 disks coming with it. If you need more, you can print those.