CrunchLabs - Build Box - Paper Airplane Launcher Right Cam
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The teeth on the right cam in our kit arrived damaged so I designed a replacement.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 510
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Public Domain
The teeth on the right cam in our kit arrived damaged. Crunchlabs is sending a replacement part for free but I took this as an opportunity to practice replication design in fusion. Note this is the right cam only and it's not 100% perfect compared to the original wood part but it's close enough that it allows the launcher to work as intended. No binding or jamming.
I printed with PLA:
- 0.2mm layer height
- 4 walls and layers, top and bottom
- 50% infill density, rectilinear (or whatever you want but you want strength)
I tried PETG but it warped due to the part being really thin (3mm). You could probably get it to work with either a brim (pain to remove) or hotter/more grippy print surface.
