CrunchLabs - Build Box - Paper Airplane Launcher Right Cam
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The teeth on the right cam in our kit arrived damaged so I designed a replacement.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 514
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Public Domain
The teeth on the right cam in our kit arrived damaged. Crunchlabs is sending a replacement part for free but I took this as an opportunity to practice replication design in fusion. Note this is the right cam only and it's not 100% perfect compared to the original wood part but it's close enough that it allows the launcher to work as intended. No binding or jamming.
I printed with PLA:
- 0.2mm layer height
- 4 walls and layers, top and bottom
- 50% infill density, rectilinear (or whatever you want but you want strength)
I tried PETG but it warped due to the part being really thin (3mm). You could probably get it to work with either a brim (pain to remove) or hotter/more grippy print surface.
