IKEA Karlstad Couch Risers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Riser blocks you can place under your IKEA couch legs to give it a lift!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I tend to store things under the IKEA Karlstad couch in my home office, but found that a lot of storage bins are just slightly too tall to fit. So I whipped up these risers! They fit under the legs and raise the couch by 20mm, which is enough to get the bins to slide underneath, but still low enough to not notice.
These should work with any furniture legs that are 50mm square. I printed these in Prusament PLA using 15% infill and the gyroid pattern, and they're plenty strong. I love 3D printing projects like these, they're quick to put together and print but work really well at solving problems.