Medium Sapi Multicurve plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Medium Sapi Mulitcurve plate designed to test out fit for feel in your plate carrier and sizing.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Medium SAPI Multicurve plate modelled in fusion 360.
Plate measures 9.5x12.5x0.8", has curves and profile that is very similar to my RMA medium sapi multicurve plate.
Is a two-part STL with an uncalibrated dovetail as the dovetail I originally modelled had too much wiggle when I printed it in ABS. Press it into place or run some sand paper or get creative.
wall count and infill doesn't really matter since I used this for non-functional purposes. Print it how you want.
Can be used for sizing (I am 6ft tall, 200 lbs) to help you determine the right size plate for your thorax.
Can be used to fill your plate bags if you like to larp and want something hard and properly shaped instead of running around with an empty plate carrier like a goober.
if you like weighted vests I guess you could fill one of these plates with sand and throw in your vest.
I printed mine with
3 walls
10% gyroid infill
0.6 nozzle
supports enabled
But, again, this is a nonfunctional part that is designed to be used for sizing, larping, and other exciting things. Print it out of whatever you want at whatever settings.
Go print a plate or two.
- RC