PTFE Tube Cutter Guide - Square Bowden Tube Cuts for 4 mm and 6 mm, No Supports (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A blade guide that cuts PTFE and Bowden tube perfectly square, with channels for 4 mm and 6 mm tube and a length scale.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A tool every 3D printer owner needs sooner or later: a guide that cuts PTFE tube at exactly 90 degrees. A square cut matters, because an angled end leaves a gap at the hotend or coupler where filament catches and clogs.
HOW TO USE
• Push the tube through its channel to the length you want (the scale shows mm from the blade).
• Slide a snap-off or razor blade straight down the slot. There's also a 45-degree slot on the 4 mm channel.
DETAILS
• 70 x 34 x 14 mm with channels for 4 mm (standard Bowden) and 6 mm tube, each with a funnel entry.
• Prints flat with no supports: the channels have pointed teardrop tops and the blade slots go straight down.
• Bambu Studio: 36 min, 16 g.
CUSTOMIZE (OpenSCAD)
Tube sizes, blade slot width and tube clearance.
Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.