PTFE Tube Cutter Guide - Square Bowden Tube Cuts for 4 mm and 6 mm, No Supports (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A blade guide that cuts PTFE and Bowden tube perfectly square, with channels for 4 mm and 6 mm tube and a length scale.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 22
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A tool every 3D printer owner needs sooner or later: a guide that cuts PTFE tube at exactly 90 degrees. A square cut matters, because an angled end leaves a gap at the hotend or coupler where filament catches and clogs.
HOW TO USE
• Push the tube through its channel to the length you want (the scale shows mm from the blade).
• Slide a snap-off or razor blade straight down the slot. There's also a 45-degree slot on the 4 mm channel.
DETAILS
• 70 x 34 x 14 mm with channels for 4 mm (standard Bowden) and 6 mm tube, each with a funnel entry.
• Prints flat with no supports: the channels have pointed teardrop tops and the blade slots go straight down.
• Bambu Studio: 36 min, 16 g.
CUSTOMIZE (OpenSCAD)
Tube sizes, blade slot width and tube clearance.
Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.