1 / 2
Corn on the Cob Holders - 8 Corn Shaped Skewers for BBQ, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Corn on the Cob Holders - 8 Corn Shaped Skewers for BBQ, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Four pairs of little corn-shaped handles with two prongs each. Push them into a hot cob and eat without burnt fingers.

Ocena
0 / 5
Polubienia
3
Pobrania
1
Wydruki
0
Wyświetlenia
28
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Corn on the cob holders: four pairs of little corn-shaped handles, each with two pointed prongs. Push one into each end of a hot cob and eat without burning your fingers or getting buttery hands. Handy for barbecues and summer dinners.

DETAILS

• Each handle is 30 x 20 mm with two 14 mm prongs.

• Prints with no supports: the handles stand on their bottoms with the prongs pointing straight up.

• Bambu Studio: 1 h 3, 24 g for all eight.

• Use a food-safe filament (PETG works well), wash by hand, and keep away from small children: the prongs are sharp.

CUSTOMIZE (OpenSCAD)

Number of pairs and prong length.

Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.

Tagi