1 / 1
Suzuki 25hp 3 cycle carburetor choke end linkage — zdjęcie 1

Suzuki 25hp 3 cycle carburetor choke end linkage

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

For linkage between the choke knob arm and the carburetor

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
7
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

On the front of the motor is a choke knob. That knob connects to a metal shaft. The metal shaft connects to a plastic adapter that has an expanding part that clips onto the metal knob of the choke mechanism on the carburetor. That bit of plastic apparently can crack and then it's a pain to try to fix it. This 3D print fixes that problem. Print with supports. We tried 3.9mm and 4.0mm for the metal knob of the choke mechanism fit. I don't recall which is perfect but the CAD files are included if you need to tweak it. We printed in PLA which should be fine but maybe something a bit more heat resistant would be ideal.

Tagi