1 / 2
Wago 221-412 Mount with Zip Tie Passthrough
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows for two Wago 221-412 connectors to be zip tied to something
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Created so I could zip tie the mount to my cable harness after replacing my part cooling fan on my Ender 3v2. Should work for other purposes.
Uses small width zip-ties (width of 2.5mm)