Modified Kite messenger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
as described in my make of Erwin's messenger I made some modifications - here are the print files for that
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
As described in detail in my make of Erwin's wonderful messenger that in turn was derived from these plans, I made minor modifications to a few of his parts and added two more parts. I added the files for both here.
Modified parts are in one stl file - they are based on v1.2 and v1.3 parts by Erwin. I removed the holes for the push rod (mine is living inside the spine tube) and adjusted some hole diameters for my needs.
New parts are in one stl file:
a plate for the rear end that connects the push rod with the release rod
a plate for the front that connects to the push rod and wraps around the line to make sure the messenger is triggered by the stopper up on the line.
I also added the OpenSCAD file for the new parts in case someone wants to play with those.
Happy flying !
BTW: The stopper I used I borrowed from this design.