Modified Kite messenger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
as described in my make of Erwin's messenger I made some modifications - here are the print files for that
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
As described in detail in my make of Erwin's wonderful messenger that in turn was derived from these plans, I made minor modifications to a few of his parts and added two more parts. I added the files for both here.
Modified parts are in one stl file - they are based on v1.2 and v1.3 parts by Erwin. I removed the holes for the push rod (mine is living inside the spine tube) and adjusted some hole diameters for my needs.
New parts are in one stl file:
a plate for the rear end that connects the push rod with the release rod
a plate for the front that connects to the push rod and wraps around the line to make sure the messenger is triggered by the stopper up on the line.
I also added the OpenSCAD file for the new parts in case someone wants to play with those.
Happy flying !
BTW: The stopper I used I borrowed from this design.