1 / 1
XIAO W5500 – 50 mm Tall Enclosure Lid with Antenna & Audio Ports — zdjęcie 1

XIAO W5500 – 50 mm Tall Enclosure Lid with Antenna & Audio Ports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

50 mm tall XIAO W5500 lid with extra space for modules and ports for a 433 MHz antenna and audio jack.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
10
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

Taller lid for additional electronics

A 50 mm tall replacement lid for the Seeed Studio XIAO W5500 Ethernet Adapter enclosure.

Created to provide extra room for modules such as a CC1101 radio receiver, a DFPlayer Mini audio player and wiring.

Changes

  • Lid dimensions: 90 × 41.6 × 50 mm.

  • 29.8 mm additional height compared with the original lid.

  • Two new Ø6.5 mm through-holes for M6 panel-mount connectors: a 433 MHz antenna connector and a 3.5 mm audio jack.

  • Original Wi-Fi antenna hole, USB-C opening, Ethernet opening and lower mating geometry retained.

  • Walls and internal posts extended.

Assembly

This model contains the modified lid only. Reuse the original enclosure base.

The new holes are clearance holes, not printed threads. Secure the connectors with their nuts and washers. Wall thickness at the new holes is 2.8 mm.

Check the connector body dimensions and threaded length before printing. Longer screws may be needed where screws pass through the extended posts. Dedicated mounts for the additional modules are not included.

Printing

Print with the roof on the build plate and the open side facing upwards. Check support requirements around the side openings in your slicer.

The model has passed CAD and mesh validation. Physical print and assembly testing are still pending.

Credits

Remixed from 3D Enclosure for the XIAO W5500 Ethernet Adapter by Seeed Studio.

Tagi