XIAO W5500 – 50 mm Tall Enclosure Lid with Antenna & Audio Ports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
50 mm tall XIAO W5500 lid with extra space for modules and ports for a 433 MHz antenna and audio jack.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Taller lid for additional electronics
A 50 mm tall replacement lid for the Seeed Studio XIAO W5500 Ethernet Adapter enclosure.
Created to provide extra room for modules such as a CC1101 radio receiver, a DFPlayer Mini audio player and wiring.
Changes
Lid dimensions: 90 × 41.6 × 50 mm.
29.8 mm additional height compared with the original lid.
Two new Ø6.5 mm through-holes for M6 panel-mount connectors: a 433 MHz antenna connector and a 3.5 mm audio jack.
Original Wi-Fi antenna hole, USB-C opening, Ethernet opening and lower mating geometry retained.
Walls and internal posts extended.
Assembly
This model contains the modified lid only. Reuse the original enclosure base.
The new holes are clearance holes, not printed threads. Secure the connectors with their nuts and washers. Wall thickness at the new holes is 2.8 mm.
Check the connector body dimensions and threaded length before printing. Longer screws may be needed where screws pass through the extended posts. Dedicated mounts for the additional modules are not included.
Printing
Print with the roof on the build plate and the open side facing upwards. Check support requirements around the side openings in your slicer.
The model has passed CAD and mesh validation. Physical print and assembly testing are still pending.
Credits
Remixed from 3D Enclosure for the XIAO W5500 Ethernet Adapter by Seeed Studio.
