Walking Leg Mechanics Type 3. Level walker.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is type 3 of the Claw foot walking mechanicals. This version uses a cam and a crank action too provide a walking…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 440
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is type 3 of the Claw foot walking mechanicals. This version uses a cam and a crank action too provide a walking system that does not raise and lower the body or tip the body when walking. So it is very good for solar powered walking robots. It uses a low cost DC gearbox type motor. This unit does not have a body so to show operation I attached a two AA battery box with built in switch to the frame. A few screws and washers are also required.
I just added a NEW Motor Small gear STL file. It has the D slot running all the way threw so that gear motors with a longer drive shaft can still allow the gear to push all the way on.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Notes:
I designed the parts in Design Spark Mechanical. Here is a you tube video to show the functions and the build. https://youtu.be/Pfw_jybhvHU
Category: Robotics