Hoot the Owl Night Light – Voronoi Kids' Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cheeky owl night light for kids' rooms that throws a starry light pattern on the walls. One piece, no supports
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 371
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Standard Digital File License
Meet Hoot
Hoot is a cheeky little owl with fluffy ear tufts, big round eyes and tiny claws hugging a branch. Pop an LED tealight inside and his Voronoi lattice body fills the bedroom with a soft, starry pattern of light — made for bedtime stories and for little ones who like a bit of glow at night.
One piece. No supports. No glue. Print him in your kid's favourite colour.
Files
Voronoi_Owl_Night_Light_Kids.3mf — plate ready for Bambu Studio, OrcaSlicer and PrusaSlicer
Voronoi_Owl_Night_Light_Kids.stl — the same model for any slicer, oriented and on the bed
README.txt — print settings, LED guide, assembly and safety notes
Size
155 mm tall, 101 × 95 mm base, Ø42 mm opening for the LED. About 4 h 45 min and 80 g of PLA at 0.2 mm.
Print settings
Setting | Value |
|---|---|
Supports | Off — supports would be trapped inside the lattice |
Layer height | 0.2 mm |
Walls | 2 |
Infill | 15% gyroid |
Top / bottom layers | 4 / 3 |
Brim | None |
Elephant-foot compensation | 0.15 mm |
Material | PLA: white glows brightest; pastel pink, sky blue, mint or lemon for a coloured glow |
Orientation | Upright, as supplied |
Needs 105 × 100 × 160 mm of build space. Tested on a Bambu Lab X2D.
Which LED to buy
A battery LED tealight, Ø38 mm (1.5") standard size — the opening is Ø42 mm
Warm white, 2700–3000 K for a cosy, sleep-friendly glow
CR2032 coin cell or USB-rechargeable
Tip for kids' rooms: pick one with a 6-hour timer or remote so it turns itself off
Search "LED tealight warm white 1.5 inch timer".
Light it up (a grown-up's job)
Switch the LED tealight on.
Set it on the nightstand.
Pop the owl on top through the Ø42 mm opening in the base.
Safety
LED tealights only — never a real candle or a hot bulb. PLA softens around 60 °C.
Coin cells are dangerous if swallowed: use tealights with a screw-locked battery cover or rechargeable ones.
Decorative night light, not a toy — keep it out of reach of toddlers.
Original design by Alex Tosetto. Please share a Make if you print one!
NEW - Bambu Lab H3C: Voronoi_Owl_Night_Light_Kids_H3C.3mf is re-centred on the 330 x 320 mm H3C plate, with the official H3C machine G-code. Sliced in Bambu Studio 2.09.