1 / 7
Hoot the Owl Night Light – Voronoi Kids' Lamp — image 1
1 / 7

Hoot the Owl Night Light – Voronoi Kids' Lamp

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A cheeky owl night light for kids' rooms that throws a starry light pattern on the walls. One piece, no supports

Rating
0 / 5
Likes
23
Downloads
92
Makes
0
Views
377
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Standard Digital File License

Meet Hoot

Hoot is a cheeky little owl with fluffy ear tufts, big round eyes and tiny claws hugging a branch. Pop an LED tealight inside and his Voronoi lattice body fills the bedroom with a soft, starry pattern of light — made for bedtime stories and for little ones who like a bit of glow at night.

One piece. No supports. No glue. Print him in your kid's favourite colour.

Files

  • Voronoi_Owl_Night_Light_Kids.3mf — plate ready for Bambu Studio, OrcaSlicer and PrusaSlicer

  • Voronoi_Owl_Night_Light_Kids.stl — the same model for any slicer, oriented and on the bed

  • README.txt — print settings, LED guide, assembly and safety notes

Size

155 mm tall, 101 × 95 mm base, Ø42 mm opening for the LED. About 4 h 45 min and 80 g of PLA at 0.2 mm.

Print settings

Setting

Value

Supports

Off — supports would be trapped inside the lattice

Layer height

0.2 mm

Walls

2

Infill

15% gyroid

Top / bottom layers

4 / 3

Brim

None

Elephant-foot compensation

0.15 mm

Material

PLA: white glows brightest; pastel pink, sky blue, mint or lemon for a coloured glow

Orientation

Upright, as supplied

Needs 105 × 100 × 160 mm of build space. Tested on a Bambu Lab X2D.

Which LED to buy

  • A battery LED tealight, Ø38 mm (1.5") standard size — the opening is Ø42 mm

  • Warm white, 2700–3000 K for a cosy, sleep-friendly glow

  • CR2032 coin cell or USB-rechargeable

  • Tip for kids' rooms: pick one with a 6-hour timer or remote so it turns itself off

Search "LED tealight warm white 1.5 inch timer".

Light it up (a grown-up's job)

  1. Switch the LED tealight on.

  2. Set it on the nightstand.

  3. Pop the owl on top through the Ø42 mm opening in the base.

Safety

  • LED tealights only — never a real candle or a hot bulb. PLA softens around 60 °C.

  • Coin cells are dangerous if swallowed: use tealights with a screw-locked battery cover or rechargeable ones.

  • Decorative night light, not a toy — keep it out of reach of toddlers.

Original design by Alex Tosetto. Please share a Make if you print one!

NEW - Bambu Lab H3C: Voronoi_Owl_Night_Light_Kids_H3C.3mf is re-centred on the 330 x 320 mm H3C plate, with the official H3C machine G-code. Sliced in Bambu Studio 2.09.

Tags