Jeep Wrangler Shifter Lock Release Button Cover (JK 2008-2017)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jeep Wrangler Shifter Lock Release Button Cover (JK 2008-2017)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If your JK Jeep Wragler ever needed to be moved with a non-functioning powertrain, this little cover was probably lost to time, leaving a very noticeable hole in the shifter cover piece.
I have made it so the tabs wont easily break since it is printed horizontally, you can easily take out and put it back in without stressing the plastic too much.
Here is a demonstration
Printed mine in Bambu PLA lite with 0.20 strength layer height and it seems to be holding up fine so far.
if you have a PEI textured plate, the texture matches almost exactly the one on the original plastic around it.
I hope this can help someone, Fusion F3D file available for fine tuning.